Foundation Repair – What Is The Best Solution?

Foundation Repair – What Is The Best Solution?

What Is Foundation Repair?

In buildings with signs of instability and potential failure, foundation repair is done. It can happen due to an increase in the weight of the structure.

The soil may shrink even when it’s moist. As a result, heaving, foundation settling, horizontal cracks basement waterproofing on basement walls, slab fracture, wall settling, and other indicators might be seen.

What Causes Foundation Damage?

Water can cause damage to a foundation. The foundation of a structure begins to move when the soil components swell. The region surrounding the foundation might have insufficient drainage.

The foundation is harmed when a plumbing leak occurs beneath the structure or when the structure is destroyed by a calamity. Foundation problems can be caused by a lot of clay in the soil.

Methods of Foundation Repair

1. Masonry Patches And Sealants

Foundation cracks can be repaired with a waterproof masonry sealant.

It is important to spot and repair cracks in your foundation as soon as possible. Silicone, silicone, and polyurethane are some of the common sealants for tiny cracks.

The severity of the crack will affect the sort of mixture used. It is best to detect and fix the problem as soon as possible.

Masonry Patches and Sealants

2. Slab Jacking

The technique of slab jacking is used to lift concrete slabs. Mudjacking, concrete lifting, and slab leveling are all terms used to describe this procedure.

This technology can be used to raise porches, stairs, decks, pathways, garage floors, and driveway.

The slab sinks or tilts when the earth beneath it changes.

To fix a settling house foundation, professionals have access to the necessary equipment.

Companies use a method called slab jacking to elevate concrete foundations by drilling holes through the foundation and into the sunken regions below.

The hole is filled with a solution of natural components. As the solution expands, the falling slab is lifted into position.

There is an alternative to slab jacking. It’s similar to slab jacking, in that it’s injected via holes in the concrete to fill gaps below. Instead of natural materials, thick and lightweight material is used.

The same procedure can be used for smaller projects, but they are both temporary solutions that may need to be re-examined every few years.

The materials are injected into the earth. Since it’s lighter, it’s not generally accessible.

3. Piering Or Piling

Piering or Piling is the name of the procedure. The pier is made of steel or concrete. There is a difference between piering and piling.

Piling can be accomplished by driving piles into the ground. Concrete piers, steel pressed Piling, and bell-bottom piers are used for foundation repairs.

These procedures return the foundation to its original level more effectively than slab jacking.

a. Concrete Pilings That Have Been Pressed

Foundation piers made of pressed concrete can be used for repairs.

They can be used for pier and beam foundations. The piers must be driven deep into the earth to provide stability.

Pressed Concrete Piling

b.Concrete Piers That Have Been Poured

The poured concrete piers are pushed around 10 feet deep and cured in a few days. The installation time for poured concrete piers is greater than for pressed concrete pilings, because they use segments that are already cured at the installation time.

Poured Concrete Piers

c. Concrete Piers That Have Been Belled

bell bottom concrete piers are the same as poured/drilled concrete piers. There is a large area of support at the bottom of the pier.

Similar to poured concrete piers, bell bottom piers are constructed by pouring concrete into an excavated pit and placing steel in the wet concrete.

Belled Concrete Pier

d. Piers Made Of Steel

Steel piers are ideal for long-term foundation repair. Steel piers are strong and may be pushed to depths of up to 100 feet. Steel piers may be pushed down so they don’t shift.

Steel Piers Insertion

e. Steel Helical Piers

lightweight repair of concrete slab foundations and pier and beam foundations can be done with the use of hilical steel piers.

There are new foundations with piers. When alternative technologies are not used, the use of helical piers is used.

The weight of the structure is transferred to the piers by threading them into the ground.

Steel Helical Pier

4) Soil Modification Or Soil Stabilization

The process of stabilizing the soil is known as soil modification. Chemicals are used to fill holes. There is a method that is similar to this.

Many users were hesitant to advocate this strategy since it requires a higher level of expertise. It is too expensive to work and maintain.


There are several repair options for the foundation. Some methods provide short-term relief, while others provide long-term relief.

The best option for our property and budget is to consult with concrete foundation specialists.

Also Read –

How To Repair Concrete Cracks

Difference Between Pier & Abutment

Types Of Bridge Abutments

What Is Pier Foundation?

If you enjoy this article, please share it with your friends and join our Telegram Channel.

Leave a Reply

Your email address will not be published.